검색 상세

해외Plant EPC/Turnkey 프로젝트계약의 주요위험과 계약자입장의 조항분석

Risk Analysis of Contractual Provisions for EPC/Turnkey Projects : Contractor’s Liability Position

고훈석 (Risk Analysis of Contractual Provisions for EPC/Turnkey Projects : Contractor’s Liability Position, 포항공과대학교)

원문보기

초록 moremore
Through this thesis, EPC/Turnkey Contract which occupies comparatively larger portion than any other types of contract while contracting in Korea’s overseas construction contract recently and is the timing that the most of risks from the owner of project are transferred to contractors would be studi...
Through this thesis, EPC/Turnkey Contract which occupies comparatively larger portion than any other types of contract while contracting in Korea’s overseas construction contract recently and is the timing that the most of risks from the owner of project are transferred to contractors would be studied about the method to assist in preparation of contract terms and conditions as followed three sequences. At First, it would discuss only about the major risks transferred though the contract than treating the whole of risks represented in the construction contract. After, it introduces the two risks filtered by surveys and literature review recently researched by the construction industry what are the most frequently transferred risks to the contractors while in the contracting stages. Secondly, it would be analyzed about the 2 selected risks for effective studies applying the assisting tools developed by the Construction Industry Institute whether it would be applicable to the EPC/turnkey project contract terms and conditions and will be summarized the lists pros and cons while application. Thirdly, difficulties found on the application of assisting tools will be issued and implemented by tracing the methodology and applying the similar technique developed before. This implementation is proposed to be used for EPC/Turnkey construction contract document. The developed tools recently by foreign research center assisting the preparation of contract documents will be applicable without modification, but will be applicable in better way if modified considering their project characteristic due to its different risk factors to be affected. Therefore assisting tool also are recommended to be modified considering the different factors which is affected to the risks in different way. In this regards, implementation introduced in this study will contribute to the preparation of better contract document at EPC/Turnkey construction contract environment.
목차 moremore
ABSTRACT I
표 목 차 V
그 림 목 차 VI
...
ABSTRACT I
표 목 차 V
그 림 목 차 VI
제1장. 서 론 1
1.1연구의 배경 및 필요성 1
1.1.1 해외건설사업의 동향 1
1.1.2 우리나라의 해외건설사업 클레임 및 분쟁에 대한 현황 및 동향 5
1.1.3 국제적인 건설사업의 클레임 및 분쟁에 대한 현황 및 연구 7
1.2문제의 정의 및 연구범위의 설정 9
1.3문헌조사 및 유사연구와의 차별성 11
1.4연구방법 24
제2장. 본 론 27
2.1 계약조항상의 핵심적인 위험의 선정 절차 27
2.2 설문조사의 수행 29
2.2.1계약조항의 기준과 설문조사 위험의 선정 29
2.2.2계약조항상 위험의 도출 과정 33
2.2.3설문조사의 작성 및 설문조사 수행 39
2.3 설문조사의 결과 요약 39
2.4 계약조항 분석대상의 선정 43
2.5 CII 개발 TOOL소개 및 활용 검토 44
2.5.1 계약적 표현 및 타협점 검토 Table 46
2.5.2 법률적 관점의 책임당사자 확인 Flow chart 46
2.6 계약적 표현 및 타협점에 대한 검토 48
2.6.1 Delay Risk 검토 48
2.6.2 Consequential Damages 검토 58
2.7 법률적 관점의 책임당사자 구분을 위한 Flow chart 검토 66
2.7.1 Delay Risk 검토 66
2.7.2 Consequential Damages 검토 78
2.8 CII 의 TOOL 활용에 대한 종합의견 86
제3장. 결 론 89
3.1 검증 및 확인 89
3.2 연구 성과 90
3.3 현업 활용 시 고려사항 91
3.4 향후 연구방향 93
REFERENCES 95